MAX510 lowbed trailer

Your lowbed solution when height matters

Do you aim high? The MAX510 lowbed proves to be the suitable means of transportation when every millimeter counts. You can also supply your vehicle with pendle-axles.

The MAX510 features a low loading platform and a bogie with 2-3 axles.

Your MAX510 is easy to load from the front thanks to the removable gooseneck.

If needed, the loading floor is extendable for more flexibility. 

Additionally, you can benefit from the proven pendle-axle technology for this version.

All the models are set on a standard width of 2,540 mm, except for the pendle-axle variant that has a width of 2,740 mm for the 3-axle version.

You can use the low bed within these fields:   

The MAX510 lowbed trailer can be utilised in the following areas of use:

ConstructionHeavy & industrial transportAgricultureCranes & equipmentForestry & wood

A fully equipped toolbox

USEFUL FEATURES TO FACILITATE YOUR DAILY WORKThe removable gooseneckallows you to load machinery easily from the front side of the lowbed.Pendle-axle technologyenables perfect maneuverability thanks to a 60° steering angle.The lowbed with pendle-axlesoffers a 600 mm stroke to overpass obstacles.The low construction height of the loading platformhelps you to transport higher loads.An excavator trough in the rear bogieallows you to lower the excavator arm.Lashing rings ensure optimal load security.The loading platform contains several lashing rings which are foldable inwards and outwards.

CLEVER OPTIONS TO BUILD UP YOUR TRAILER

Galvanised outriggers are extendable up to ca. 230 mm per side. Hardwood timber is used for the outriggers.

Hydraulic connections from loading platform to gooseneck via multi-coupling instead of screw coupling. 

Ramps to bridge the deck hooks for easy access.

Removable sideboards in aluminium on the gooseneck.

Two pairs of screwable container locks to load 1 x 20‘ or 1 x 40‘ containers. 

Removable galvanised sliding bolster as an additional support point.

Central greasing BEKAMAX for a longer life cycle of wear parts.

Ramps with grip strips cover between lowbed and axle bogie for driving on with forestry machinery. 

Bolt-on elements to the front cross members for bridging the gap while extended. A lowered version for the forestry sector so that the elements can stay in the lowbed when retracted.

Pockets for stakes in the outer frame for additional load securing. 

See our lowbed trailers in action